Welcome to Discuss these Issues with us!
Zalo
Line
Brief introduction to material and interface design of tower
1. Climbing frame, support, support are all made of hot dip galvanized steel plate folding treatment, Shougang 275 grams of rust. 2. The ladder is folded with 275g galvanized steel plate, and then fixed hard link with galvanized screws. The connecting holes of the ladder and the tower are accurate; 3. The opening error is less than 1mm, all the opening can be directly to the installation of fast; 4. The tower adopts the circular cone design, and the tower under the cone mouth can be closely connected, no powder leakage; 5. Tower on the conical design, cone hole under a drive folding, not out of the glue will not seepage; 6. The guardrail and bar connection on the small tower are all 275 pieces of hot galvanized sheet; 7. The single sensor wire cutting steel chain is reliably fixed on the ground, the weight of the single sensor product after assembly is more than 17 kg; 8. The tower of the tower is a word wave design, the wave of the same steel plate, the strength will be greater, the load will be more stable. Check the actual capacity of the tower.