1. Choose a tower support leg, cut off at the appropriate height; Then the top of the S-type sensor is connected with the conical bearing bearing bearing bearing bolt, and the bottom is fixed with the outrigger. Then the conical bearing bearing bearing is translated next to the outrigger, and the tower outrigger is held tight with two leg hogs. 2. Repeat the above steps in diagonal order until all tower legs are installed. 3. Wherein, all the s-sensor signal output to the multi-channel weighing instrument. 4. When the tower is fed or consumed, the multi-channel weighing instrument can display the weight of the material in the tower in real time, so as to remind the feeders whether they need to fill the material or not, so as to avoid the lack of material.
Advantages of tower weighing sensor
1. Automatic ingredients, feed can be controlled,
2. Quantitative feeding, to avoid artificial feeding inconsistencies, malnutrition and stunting;
3. Can facilitate the daily management of farms;
4.Closed feeding design, can effectively reduce mice and flies to feed pollution and stealing;
5. Conducive to breeding health and reduce feed waste, reduce breeding costs.
5. After cutting the tower legs have a certain height difference, by adjusting the bearing bolts, so that the tower is in a horizontal state. 6. Proper adjustment of the position of the conical bearing can make up for the defect that the ground is in a non-horizontal state. 7. Because the ouleg hoop adopts two pieces, it can be applied to a variety of oulegs of different diameters, and can also be applied to other types of oulegs after appropriate transformation. 8. Install windproof top wire in the tapered weighing bearing and adjust it to the appropriate position, which can reduce the influence of shaking caused by strong wind on the weighing result of the material tower.
Welcome to Discuss these Issues with us!
Zalo
Line